Common problems with plastic windows

Jun 01, 2026|

Over time, the profiles of PVC windows and doors may turn yellow. Causes include purchasing inferior products, aging of the rubber strips, contact with chemicals (such as pesticides), or acid rain. Yellowing from external substances can be cleaned with alcohol or fine salt water; inferior rubber strips require replacement .

 

Leakage is a common problem, caused by poor sealing between the window frame and the wall, loose hardware, deformed window sash, aging or missing rubber strips, and blocked drainage holes. Recommended solutions include: filling the gap between the window frame and the wall with expanding foam and then sealing with sealant; replacing hardware; replacing deformed window sashes; replacing aged rubber strips; and cleaning drainage holes. Users should not block the drainage holes and air pressure balancing holes of windows and doors themselves.

 

Deformation problems may be caused by using inferior profiles, improper installation, or extreme weather. In 2014, a consumer complained that PVC windows made with "Seashell" brand profiles experienced severe frame deformation after high temperatures, such as narrowing of the upper part of the sliding frame and denting at the lower part. In the early days, to reduce costs, large amounts of calcium carbonate were filled into the profiles, resulting in windows that discolored and cracked very quickly after being made.

 

In the past, due to the rapid expansion of the industry and fierce competition, some companies engaged in practices such as using inferior materials, cutting corners, and engaging in price wars, which affected the product quality and social reputation of plastic doors and windows.

Next: No Information →
Send Inquiry