Types of surface materials used in metal curtain walls

Jun 11, 2026|

The main panel materials used in metal curtain walls include: aluminum composite panels, single-layer aluminum panels, aluminum honeycomb panels, fireproof panels, titanium-zinc-plastic-aluminum composite panels, sandwich insulated aluminum panels, stainless steel panels, color-coated steel panels, and enameled steel panels.

 

Aluminum composite panels consist of two 0.5mm thick aluminum sheets sandwiching a 2-5mm thick polyethylene or rigid polyethylene foam board. The surface is coated with fluorocarbon resin, forming a tough, stable film layer with excellent adhesion and durability. They come in a variety of colors, and the back is coated with polyester paint to prevent potential corrosion. Aluminum composite panels were a commonly used panel material in the early days of metal curtain walls.

 

Single-layer aluminum panels use 2.5mm or 3mm thick aluminum alloy sheets. The surface coating of single-layer aluminum panels used in exterior curtain walls is the same as that of aluminum composite panels, ensuring identical toughness, stability, adhesion, and durability. Single-layer aluminum panels are another commonly used panel material for metal curtain walls after aluminum composite panels, and their application is increasing.

 

Honeycomb aluminum panels are a composite material made of two aluminum sheets bonded together with a honeycomb core material. Depending on the function and durability requirements of the curtain wall, honeycomb aluminum panels with thicknesses of 10mm, 12mm, 15mm, 20mm, and 25mm can be selected. A 10mm thick honeycomb aluminum panel should consist of a 1mm thick front aluminum sheet, a 0.5-0.8mm thick back aluminum alloy sheet, and aluminum honeycomb material bonded together. For honeycomb aluminum panels thicker than 10mm, both the front and back aluminum alloy sheets should be 1mm thick. Honeycomb aluminum panels used in curtain walls should be aluminum honeycomb, and the honeycomb shape can be regular hexagonal, flat hexagonal, rectangular, square, cross-shaped, or flat rectangular, etc. The honeycomb core material requires special treatment; otherwise, its strength will be low and its lifespan short. For example, chemical oxidation of the aluminum foil can increase its strength and corrosion resistance. Besides aluminum foil, fiberglass honeycomb and paper honeycomb core materials also exist, but these are not commonly used in practice. Due to the high cost of honeycomb aluminum panels, their usage is limited.

 

Fire-resistant sandwich panels are fire-resistant sandwich panels made by hot-pressing a metal sheet (aluminum, stainless steel, color-coated steel, titanium-zinc, titanium, copper, etc.) as the face layer and a halogen-free flame-retardant inorganic modified filler as the core layer. According to GB8624-2006, they are classified into two fire performance ratings: A2 and B.

 

Metal sandwich fire-resistant panels possess both fire-resistant properties and maintain the mechanical properties of corresponding metal-plastic composite panels. They can be used as exterior and interior wall decoration materials and interior ceilings for new buildings and renovations of old buildings. They are particularly suitable for large, high-density public buildings with high fire resistance requirements, such as conference centers, exhibition halls, stadiums, and theaters. Titanium-zinc alloy aluminum composite panel (TiZA) is a new type of high-grade aluminum composite building material made by thermally bonding titanium-zinc alloy sheets as the face panel, 3003H26 (H24) aluminum sheets as the back panel, and high-pressure low-density polyethylene (LDPE) as the core material. It combines the characteristics of titanium-zinc sheets (metallic texture, self-healing surface, long service life, good plasticity, etc.) with the advantages of composite panels, such as flatness and high bending resistance, making it a model of the combination of classical art and modern technology.

 

It is mainly used for building roofs and curtain wall systems.

Initially, from a distance, it appears as a natural, fresh blue-gray; up close, it exhibits the rustic texture of natural metal. Over time, a dense and hard zinc carbonate anti-corrosion layer gradually forms on the surface of the titanium-zinc sheet exposed to the atmosphere, preventing further corrosion. Even scratches and imperfections completely disappear during this evolution process. For buildings requiring a strong sense of naturalness, it is undoubtedly an ideal decorative material, particularly suitable for environments with a rich natural and historical atmosphere, adding unique charm to both modern and classical architecture. It possesses good strength and rigidity, resisting strong winds and other harsh climatic conditions. Its good plasticity makes it easy to process and install, facilitating three-dimensional design and adapting to diverse layout requirements. It can fully express the architect's personality, satisfying their rich creative imagination and inspiration.


Sandwich Insulated Aluminum Panels: Similar in form to aluminum honeycomb panels and aluminum composite panels, the difference lies in the core material. Sandwich insulated aluminum panels use insulation materials (such as rock wool) for the core layer. Due to their high price and the fact that other aluminum panels with added insulation materials can achieve the same insulation effect, their usage is currently limited (as of the end of 2014).


Stainless Steel Plates: Available in mirror finish, matte finish, and titanium finishes. Stainless steel plates have excellent durability and wear resistance, but excessively thin plates can bulge, while excessively thick plates are very heavy and expensive. Therefore, stainless steel plates are not widely used in curtain walls, playing a significant role only in partial decorative applications.


Color-coated steel sheet is a type of steel sheet with an organic coating. It boasts advantages such as good corrosion resistance, vibrant colors, attractive appearance, easy processing and forming, and the retention of the original strength of steel, all at a lower cost. The substrate for color-coated steel sheets can be cold-rolled, hot-dip galvanized, or electro-galvanized. Coating types include polyester, silicone-modified polyester, polyvinylidene fluoride (PVDF), and plastisol. Surface finishes include coated sheets, embossed sheets, and printed sheets. Color-coated steel sheets are widely used in the construction, home appliance, and transportation industries. In the construction industry, they are mainly used for roofs, walls, and doors of steel structure factories, airports, warehouses, and cold storage facilities in industrial and commercial buildings. Their use in residential buildings is less common.


Enameled steel sheet: Its base material is a 1.6mm thick ultra-low carbon steel sheet (carbon content of 0.004%, while the carbon content of ordinary steel sheet is 0.060%). Its coefficient of thermal expansion is close to that of the enamel glaze, preventing warping and bulging caused by expansion stress after firing. It also improves the adhesion strength between the glaze and the steel sheet. Its production process is similar to enameling; after repeated cleaning such as pickling, a glassy mixture powder is coated onto the steel sheet, and it is then fired at 850℃. Enameled steel sheet combines the strength of steel sheet with the smoothness and hardness of glass, but without the brittleness of glass. The glassy mixture can be formulated into various colors and patterns. Currently, there are no established quality inspection standards for enamel steel sheets, nor are there construction specifications and acceptance standards for enamel steel sheets as cladding materials. Therefore, the application of enamel steel sheets in construction projects is limited.

 

In short, the abundance of decorative cladding materials has added enormous development potential to metal curtain walls.

Send Inquiry