Energy-saving technologies and development of exposed-frame glass curtain walls

Jun 06, 2026|

After 2000, with the increasing demands for building thermal performance, thermally broken profiles and Low-E insulated glass began to be widely used in building curtain walls. The overall design concept for exposed-frame insulated glass curtain walls is to change the dimensions of the thermal break strips and sealing strips, and select insulated glass of different thicknesses, while keeping the cross-section of the aluminum alloy profile unchanged, to meet the thermal insulation design requirements of different regions, building types, and owners. The design of the energy-saving and thermally insulated aluminum alloy profile is the core part of the entire exposed-frame insulated glass curtain wall development project. It divides the aluminum alloy profile in two and adds a non-metallic material with low thermal conductivity and high mechanical properties as a thermal break strip. This combination of materials meets both the structural mechanical performance requirements and the thermal insulation performance requirements. The thermal insulation principle of thermally broken aluminum profiles is based on creating a continuous thermal insulation zone, using thermal break strips to divide the aluminum alloy profile into two parts.

 

By combining the components, four different series-JN18, JN30, JN36, and JN48-can be formed. Selecting insulated glass (or single-pane glass) of different thicknesses can create exposed-frame insulated glass curtain wall systems with varying performance characteristics. The thermal break strip "cold bridge" is made of polyamide nylon 66, with a thermal conductivity of 0.3 W/(m·K), far lower than that of aluminum alloy, while its mechanical properties are comparable to aluminum alloy. The sealing strip is made of EPDM rubber, which offers advantages such as good weather resistance, heat resistance, and sealing performance.

Send Inquiry